CRX 72 x 25 TOOL BOX AND HUTCH, ROLL CABS BY EXTREME TOOLS

CRX 72 x 25 TOOL BOX AND HUTCH, ROLL CABS BY EXTREME TOOLS
CRX 72 x 25 TOOL BOX AND HUTCH, ROLL CABS BY EXTREME TOOLS

CRX 72 x 25 TOOL BOX AND HUTCH, ROLL CABS BY EXTREME TOOLS

The CRX722519RC Rolling Tool Cabinet Set up, made for RollCabs. Comes with: Toolbox and matching Hutch! Easily comparable to other tool truck boxes at a fraction of the cost! 72" wide, 3 bank tool box and it measures 25" deep, and stands 47 high.

With 19 drawers there is plenty of room to organize your tool set. It has a mix of long, deep, narrow and wide drawers which gives you plenty of versatility. The top drawer is 51" wide x 5.8" high just right for socket trays and deep sockets or power tools to be displayed, no more drawer jams.

The 2 drawers below it are also 51" wide x 2.8 " high and allow for long pry bars, extensions, screwdrivers, and other hard to store tools to be locked up. 6 deep drawers with 2 sets of ball bearing glides, with a 300 pound capacity each. The remaining 13 drawers are rated at 150 pound capacity each.

All drawers are full extension drawers and pull out to the back, all wide drawers have reinforcing support panels spot welded under the drawer to support heavy loads. Compare these cabinets and boxes to similar size Snap On Tool Box, Mac Tool Box, and Matco Tool Box, and you will see how solid these boxes really are.

CRX722519RC 72 19 Drawer Roller Tool Cabinet. 72"W x 25"D x 47H.

New, Updated durable 5/8 thick work surface. Expanded drawer width design 3 top 51 drawers. (6) 6" x 2" casters (4 lockable swivel and 2 rigid). High Gloss Powder Coat Finish. Full-width, polished solid aluminum drawer pulls are self-latching, quick-release drawer pulls.

Drawers use full-extension ball bearing glides and open fully. Deep drawers with double slides.

Tubular coded lock and keys. Slides (25 pairs): Full extension ball bearing slides.

Drawer Pulls: High polished AL extrusion quick release. Back and sides: 18 gauge. Top reinforce support: 21 gauge. Total Capacity: 33882.52 cubic inch.

CRX722501HC 72 Top Tool Hutch Features. Dimensions: 72"L X 25"W X 22 1/4H. Accessory air tool holder included. Rear steel wall of hutch are preformed with 1/4 holes (pegboard style) for organizing tools. Door rides on heavy track/channel for easy operation. 2 struts assist door travel for smooth operation.

More About Upgraded CRX Series Tool Boxes. Just bought the black triple bank top and bottom it's a ton of storage for the buck everything seems to be high quality and just as good as Snap On and MAC.

Our complete toolbox product line is made by Extreme Tools. Extreme's RX series toolboxes have been upgraded to our CRX series. Part number (Extreme's "RX" Series) change to CRX to designate the following upgrades.

On all CRX series drawers 4 high or more, where two ball bearing glides are used, the load capacity is 300 pounds. CRX series use rubber drawer liners in place of foam drawer liners. CRX series roll cabinets include new, thick protective work panel in place of foam pad. All CRX toolboxes are not only reduced in price but have added benefits compared to the RX Series Extreme Tools' tool boxes!

This item is in the category "eBay Motors\Automotive Tools & Supplies\Auto Tool Boxes & Storage\Garage/Shop Tool Chests". The seller is "nhproequip1" and is located in this country: US. This item can be shipped to United States.


CRX 72 x 25 TOOL BOX AND HUTCH, ROLL CABS BY EXTREME TOOLS